Thrd/SW Pipe - CADWorx - Help

CADWorx Plant

Language
English
Product
CADWorx
Subproduct
Plant
Search by Category
Help
CAESAR II Version
12
I-Configure Version
6.0(2016)
Smart Isometrics Version
8
Spoolgen Version
10
CADWorx Version
20.1 (2020 R1)
CADWorx Structure Version
2020 R1 (4.1)

Thrd/SW Fittings toolbar: Thrd/SW Pipe

Command line: PIPF

Places a pipe component in the X-Y plane.

If the drawing environment is set to threaded, the piping component has threaded ends. If the drawing environment is set to a socket weld, the piping component has plain ends.

Ends

Specifies the end options for the starting and ending of the pipe.

  • Threaded

Used when working with threaded pipe. The threaded default option appears when the environment is set to threaded mode. For more information, see Setup Size/Spec Panel.

  • Bevel

Used when working with welded components.

  • Plain

Used when working with threaded pipe. The threaded default option appears when the environment is set to threaded mode. For more information, see Setup Size/Spec Panel.

last point

Starts the pipe at the last point of the previously-created component.

TOP

Places the pipe along the top of the pipe, as defined along the Z-axis.

BOP

Places the pipe along the bottom of the pipe, as defined along the Z-axis.

Right

Places the pipe along the right side of the pipe, as defined along the Z-axis.

Left

Places the pipe along the left side of the pipe, as defined along the Z-axis.