Place an adjustable bend - CADWorx - Help

CADWorx Plant

Language
English
Product
CADWorx
Subproduct
Plant
Search by Category
Help
CAESAR II Version
12
I-Configure Version
6.0(2016)
Smart Isometrics Version
8
Spoolgen Version
10
CADWorx Version
20.1 (2020 R1)
CADWorx Structure Version
2020 R1 (4.1)

Enter Radius

  1. Click Adjustable Bend on the Buttweld toolbar in the Miters drop-down. Alternatively, type BENT on the command line, and then press ENTER.

  2. Type a radius on the command line, and then press ENTER.

  3. Select a center point.

  4. Select a first direction.

  5. Select a second direction.

  6. Type a Tangent length on the command line, and then press ENTER.

    The adjustable bend displays in the drawing.

Select Arc

  1. Type ARC on the command line, and then draw an arc.

  2. Click Adjustable Bend on the Buttweld toolbar in the Miters drop-down. Alternatively, type BENT on the command line, and then press ENTER.

  3. Click Select Arc.

  4. Select the arc in the drawing.

  5. Type a Tangent length on the command line, and then press ENTER.

    The adjustable bend displays in the drawing.

Trimmed Elbow

  1. Click Adjustable Bend on the Buttweld toolbar in the Miters drop-down. Alternatively, type BENT on the command line, and then press ENTER.

  2. Select Trimmed Elbow.

  3. Select a corner point.

  4. Select a first direction.

  5. Select a second direction.

  6. Select Long radius or Short radius.

    The adjustable bend displays in the drawing.