Create a graphic overlay from a drawing for a valve - CADWorx - Help

1. Create a drawing to use as a graphic overlay on a valve, and then save and close the drawing. If you already have a valve drawing created, you can select that drawing in the following procedure.

   

   You must set a specification before you can run this command.

2. Click Graphics Overlay Editor , or type COMPONENTDWGBLOCKEDIT on the command line, and then press ENTER.

   The Graphics Overlay Editor dialog box displays.

3. Select a valve type.

4. Click in the DWGNAME box next to the size you want to assign for the graphic overlay.

5. Select Select Block (or Drawing).

   The Select Drawing dialog box displays.

6. Select a drawing that contains a graphic overlay block, and then click Open.

7. Click Apply.

8. Click OK.

Next, see Display graphic overlays of valve components in the 3D model.