Allows you to define general flange properties for weld neck flanges. The software then fills in flange and gasket dimensions with the closest standard size.
The values defined by the software are only valid when you set Flange Type to Integral Weld Neck. For more information, see Properties (Flange).
Flange Class
Specifies the ASME/ANSI flange pressure class. Classes range from 150 to 2500.
Nominal Diameter
Specifies the weld neck flange diameter.
Large Diameter Flanges
Series
Specifies the AMSE large-diameter flange series. Select A for thicker, heavier, and stronger flanges. Select B for flanges with smaller fasteners and a smaller bolt circle diameter.
Attached Pipe ID
Specifies the inside diameter of the pipe attached to the flange.
Attached Pipe Thickness
Specifies the wall thickness of the pipe attached to the flange.