Standard
Type the profile Standard. Empty value means any. Profile Type (Design System) can be different than profile article Profile Type.
Profile Type (Design System)
Design system, for example BP. Empty value means any.
Size (Design System)
Size can be determined with profile type and profile dimensions: Web Height, Web Thickness, Flange Width and Flange Thickness.
Profile Type
The target profile type in the end code for the profile robot.
Size
Size can be determined with profile type and profile dimensions: Web Height, Web Thickness, Flange Width and Flange Thickness.
Section Type
The cross-section symbols are described in the Intergraph Smart 3D 2D Symbols Reference Data Help. More information about Member Cross Section types and Profile Cross Section types can be found in the sections Member Cross Sections and Profile Cross Sections, respectively.
|
S3D Section Type |
DSTV profile type |
Description |
|
|---|---|---|---|
|
IBar, S, M, HP, W |
I |
I profile |
|
|
Channel, C, MC |
U |
U profile |
|
|
BulbFlat, EqualAngle, UnequalAngle, L |
L |
L profile |
|
|
RectangleTube, HSSR |
M |
Rectangular tube |
|
|
RoundBar |
RO |
Round bar |
|
|
RoundTube, HSSC, PIPE |
RU |
Round tube |
|
|
C |
C profile |
||
|
TeeBar, WT, MT, ST |
T |
T profile |
|
|
SO |
Z profile and all the other types of profile |
||
|
FlatBar |
B |
DSTV
Profile types are named according to the DSTV standard.
|
DSTV profile type |
Description |
|
|---|---|---|
|
I |
I profile |
|
|
U |
U profile |
|
|
L |
L profile |
|
|
M |
Rectangular tube |
|
|
RO |
Round bar |
|
|
RU |
Round tube |
|
|
C |
C profile |
|
|
T |
T profile |
|
|
SO |
Z profile and all the other types of profile |
Web Height
The dimensions of the profile are defined in the profile picture below.
Flange Width
The dimensions of the profile are defined in profile picture above.
Web Thickness
The dimensions of the profile are defined in profile picture above.
Flange Thickness
The dimensions of the profile are defined in profile picture above.
Outer diameter
The outer diameter of pipe or round bar
Thickness
The thickness of pipe
Fillet Radius
The dimensions of the profile are defined in profile picture above.
Corner Radius
The dimensions of the profile are defined in profile picture above.
Symmetric
The symmetry of the profile can be set for the X, Y, and X-Y axes, or it can be set to None.
Area
The area of the profile is calculated according to the profile dimensions.
Created, Creator, Changed, Changer
When or who are created or changed profile cross section data.