The Plain Piping Generic Data sheet in the AllCommon.xls workbook defines generic data for plain piping ends.
Nominal Piping Diameter
Type the nominal piping diameter for the plain pipe.
Nominal Diameter Units
Specify the units for the NPD column. For example, type mm or in.
End Standard
Type the end standard code. Valid codes are listed in the AllCodeLists.xls workbook on the End Standard sheet in the Codelist Number column.
Schedule
Type the schedule code.
Pressure Rating
Type the maximum pressure allowed for the pipe.
Piping Outside Diameter
Type the outside diameter value with units.
Wall Thickness
Type the pipe wall thickness with units.