Replace Two Straight Features with a Straight Feature
-
Click Select on the vertical toolbar.
-
Select Piping Features in the Locate Filter box.
-
Press the CTRL key and select the required straight features graphically. For example, select two pipes of length 750 mm each.
-
Click Properties on the ribbon to display the Pipe Straight Feature Properties Dialog.
-
Change the Option value. For example, select 1500 mm.
-
Click OK.
-
Delete split 1 to replace the two 750 mm pipes with a 1500 mm pipe.
Split a Straight Feature
-
Click Select on the vertical toolbar.
-
Select Piping Features in the Locate Filter box.
-
Select the straight feature to split. For example, select a 2000 mm pipe.
-
On the ribbon, change the Option value. For example, if you change 2000 mm to 750 mm, the software splits the 2000 mm pipe into two 750 mm pipes and a 500 mm pipe. If the routed pipe exceeds the specified length, the software places a split.
-
Select the straight feature that does not have a value for Option.
-
On the ribbon, select the appropriate length value from the Option list. For example, select 500 mm so that route generates a 500 mm pipe stock.