Control Valve Sizing
-
ISA S75.01 (1995)
-
IEC 60534-2-1 (1998)
Noise Calculation
-
Masoneilan OZ 3000E (1984) - Hydrodynamic Noise
-
ISA S75.17 (1991) - Aerodynamic Noise
-
IEC 534-8-3 (1995)
-
IEC 534-8-4 (1994)
Flow Meter Sizing
Square Edge Orifice |
Standard |
---|---|
Flange Tappings |
ISO*/Miller** |
Corner Tappings |
ISO/Miller |
Radius Tappings |
ISO/Miller |
Small-Bore Honed-Orifice Meter Run with Corner Tappings |
Miller |
Small-Bore Honed-Orifice Meter Run with Flange Tappings |
Miller |
Pipe Tappings (2.5D & 8D) |
Miller |
AGA Report 3 (Flange Tappings) |
AGA Rep.3*** |
AGA Report 3 (Pipe Tappings) |
AGA Rep.3 |
Quarter of Circle (Quadrant Edge) Orifice |
Standard |
---|---|
Flange tappings |
BS 1042**** |
Corner Tappings |
BS 1042**** |
Radius Tappings |
BS 1042**** |
Conical Entrance Orifice |
Miller |
Lo-Loss Tube |
Miller |
Venturi Tube |
Standard |
---|---|
Classical venturi tube with an "as cast" convergent section |
ISO/Miller |
Classical venturi tube with a machined convergent section |
ISO/Miller |
Classical venturi tube with a rough-welded sheet-iron convergent section |
ISO/Miller |
Universal Venturi Tube |
Miller |
Nozzle |
Standard |
---|---|
ISO Long Radius Nozzle |
ISO |
ASME Long Radius Nozzle |
Miller |
ISA 1932 Nozzle |
ISO/Miller |
Venturi Nozzle |
ISO/Miller |
Eccentric Orifice |
Standard |
Diametrically Opposite Flange Tappings |
Miller |
Side (90°) Flange Tappings |
Miller |
Diametrically Opposite Vena Contracta Tappings |
Miller |
Side (90°) Vena Contracta Tappings |
Miller |
Segmental Orifice |
Standard |
---|---|
Flange Tappings |
Miller |
Vena Contracta Tappings |
Miller |
-
* ISO 5167-1 (1991), ISO 5167-1 (1998), or ISO 5167 (2003)
-
** Flow Measurement Engineering Handbook by R.W. Miller, 3rd edition (1996)
-
*** ANSI/API 2530 (1991) [AGA Report 3]
-
**** British standard 1042. Section 1.2 (1989)
Relief Valve Sizing
API RP 520, seventh edition (January 2000)
Thermowell Calculation
ASME PTC 19.3 (1974)
ASME PTC 19.3 TW (2010)