Shape at Edge Outside - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Reference Data Overview

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
11 (2016)

Value


Bounded Outer Surface Intersects Edge

Bounded Outer Surface Intersects Nothing

Bounded Outer Surface Intersects Corner

No Bounded Flange

None

The purpose is to maintain maximum contact between the bounded and bounding objects.

Edge To Flange

The purpose is to leave the bounded flange connected, if it exists, and clear material just inside the bounded flange, while leaving the bounded web attached to the bounding edge if there is any overlap. If the overlap is insufficient for the default feature, the answer is not applicable, and no feature should be placed. If there is no flange, it should behave like Edge To Outside.

Edge To Outside

The purpose is to disconnect the bounded flange, if it exists, and leave part of the bounded web attached to the edge of the bounding flange if there is any overlap. If there is no overlap, then the flange is set back starting at the corner, but no additional material is removed from the web (compare to Corner To Outside).

Corner To Flange

The purpose is to leave the bounded flange connected, if it exists, and disconnect the bounded web from the edge of the bounding edge if there is any overlap. If the overlap is insufficient for the default feature, the answer is not applicable, and no feature should be placed. If there is no flange, it should behave like Corner To Outside.

Corner To Outside

The purpose is to disconnect the bounded flange, if it exists, and disconnect the bounded web from the edge of the bounding edge if there is any overlap.

Outside To Edge

The purpose is to leave the bounded flange connected, if it exists, and clear material in the immediate vicinity of the bounding corner. If the overlap at the bounding edge is insufficient for the default feature, it should behave like Outside To Outside.

Outside To Flange

The purpose is to disconnect the bounded flange, if it exists, and clear material in the vicinity of the bounding inside corner. If there is no flange, it behaves like Outside To Outside.

Outside To Outside

The purpose is to disconnect the bounded flange, if it exists, and clear material in the immediate vicinity of the bounding edge and the outside corner of the bounding edge.