Cross Section Symbol CS - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Reference Data Overview

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
11 (2016)

The CS cross section symbol defines solid round sections and uses the following properties.

Section Name

Type the section name. This name appears when you label members. The section name must be unique within the section standard.

Short Name

Type the short name for the section.

EDI Name

Type the Electronic Data Interchange name for the section. This name is used when translating sections through CIMsteel. This property is currently not used.

Group Id

Type the material group identification for the section.

Unit Weight

Type the weight of the section. The unit weight is defined in mass per length pound per foot (lbm/ft).

Area

Type the cross-sectional area for the section. The area is defined in square inches or square millimeters.

Depth

Type the depth of the section.

Width

Type the width of the section.

Perimeter

Type the outside perimeter distance for the section.

Ixx

Type the moment of inertia for the section's local x-axis.

Zxx

Type the plastic section modulus for the section's local x-axis.

Sxx

Type the section modulus for the section's local x-axis.

Rxx

Type the radius of gyration for the section's local x-axis.

Ryy

Type the radius of gyration for the section's local y-axis.

ro

Type the polar radius of gyration about the shear center.

H

Type the flexural constant.

IsHollow

Specify if the cross-section is hollow or not. For this cross-section, the default value is False.

IsSymmetricAlongX

Specify if the cross-section is symmetrical along the local x-axis. For this cross-section, the default value is True.

IsSymmetricAlongY

Specify if the cross-section is symmetrical along the local y-axis. For this cross-section, the default value is True.