Corner Features for Members - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Reference Data Overview

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
11 (2016)

Member corner features are detailed cuts at the corner of two surfaces created by one or more member end cuts. Corner features are created only as a child of a member assembly connection or a member end cut.

For more information on the use of edge and face in the table below, see End Cuts for Members.

The following corner feature symbols are delivered in the [Reference Data Product Folder]\SharedContent\Marine Library\Corner Features and [Reference Data Product Folder]\SharedContent\Corner Features folders.

Name

Description

Parameters

Arc Corner Relief

Provides a minimal fit-up clearance at a corner of the bounding edge. When the bounded object is within the bounding object, the corner feature may only be placed at the inside corner. When the bounded object extends outside the bounding object, the corner feature may also be placed on the outside corner.

Corner To Far Face Edge Relief

Clears material from the bounding edge and around one corner. It is typically applied to the inside corner to relieve the outside corner. The reverse is also possible.

This feature is applicable when the bounded object extends outside the bounding object.

Edge Hook Relief

Disconnects the bounded object from the inside of the bounding edge.

Edge To Face Rathole

Provides welding access to the back side of the bounded flange or web.

This feature is applicable when there is no bounding edge.

Face To Inside Rathole 2

Provides welding access to the back side of the bounded flange or web and disconnects the member from the inside of the bounding edge.

This feature is applicable when the inner surface of the bounded flange/web is outside the inner surface of the bounded edge.

Fillet Ellipse

Trims the bounded part along the bounding fillet.

In Out Hook Relief

Clears all material from the bounding edge and in the vicinity of both corners.

Outside Hook Relief

Disconnects the bounding object from the bounded edge and the inner surface of the bounding edge, while leaving it connected to the outside face.

This feature is applicable when bounded object extends outside the bounding object.

Short Edge Rathole

Provides welding access to the back side of the bounded flange or web.

This feature is applicable when the inner surface of the bounded flange/web is significantly outside the inner surface of the bounded edge.

Two Edge Rathole

Provides welding access to the back side of the bounded flange or web and disconnect the member from the inside of the bounding edge.