Tee Welds - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Reference Data Overview

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
11 (2016)

Tee welds are controlled by the category from the assembly connection and the type of objects being welded, and passed down to the physical connection.

The default value for First Welding Side is Molded. You can change it to AntiMolded.

Tee Weld

Category or
Objects Welded

Parameters

Y

One Sided Bevel

If thickness £ 25mm, Nose = 3mm

If thickness > 25mm and £ 38mm, Nose = 5mm

If thickness > 38mm, Nose = t/2

RefSideBevelAngle = 45º

Fillet Leg = 0.2 * minimum t

K

TwoSidedBevel

If thickness £ 25mm:]

  • Nose = 3mm

If thickness > 25mm:

  • Nose = t/3

  • BevelDepth (both) = t/3

BevelAngle (both) = 45º

Fillet Leg = 0.2 * minimum t

V

OneSidedBevel

Thickness £ 25mm

BevelAngle (both) = 45º

Fillet Leg = 0.2 * minimum t

X

TwoSidedBevel

Thickness > 25mm

If thickness £ 38mm:

  • RefSideBevel Depth = t/3

  • AntiRefSideBevel Depth = t/3

If thickness > 38mm:

  • RefSideBevel Depth = 2 t/5

  • AntiRefSideBevel Depth = 3 t/5

RefSideBevelAngle = 45º

Fillet Leg = 0.2 * minimum t

Staggered

Zig Zag

Staggered

Pitch = 300mm

Length = 75mm

Fillet Leg = 0.2 * minimum t

Chain

Chain

Pitch = 300mm

Length = 75mm

Fillet Leg = 0.2 * minimum t

Chill

Chill

RootGap = 6mm

RefSideBevelAngle = 30º

Fillet 1

Non-tight collar

Tripping bracket

Profile stiffeners

Leg = 0.2 * minimum t

Fillet 2

Profile end to
profile web

Leg = 0.2 * minimum t