Defines the appearance of a leader line. To choose a default style delivered with the software, select the style to apply to the leader line.
-
ANSI: Applies a thin, solid, dark cyan line style with a filled arrow terminator to the leader line.
-
ANSI_FRACTIONAL: Applies a thick, solid, dark cyan line style with a filled arrow terminator to the leader line.
-
ANSI_NOARROW: Applies a thick, solid, dark cyan line style with no terminator to the leader line.
-
JIS: Applies a thick, solid, dark cyan line style with a large, open arrow terminator to the leader line.
-
ISO: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.
-
DIN: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.
-
ASA: Applies a thick, solid, dark cyan line style with a filled arrow terminator to the leader line.
-
BSI: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.
The following additional styles are available for Marine only. Select the style to apply to the leader line.
-
ISISO: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.
-
ISISO 2.5x: Applies a thick, solid, dark cyan line style with a small, filled arrow terminator to the leader line.
-
ISISO_Slash: Applies a thick, solid, dark cyan line style with a slash terminator to the leader line.
-
ISISO_Slash_Red: Applies a thick, solid, red line style with a slash terminator to the leader line.
-
ISIS0Right 2.5x: Applies a thin, solid, dark cyan line style with a small, filled arrow terminator to the leader line.
-
ISORight: Applies a thin, solid, dark cyan line with a large, filled arrow terminator to the leader line.
You can use SmartSketch Drawing Editor to create your own styles.
-
The following leader modules use the Style property:
-
Coordinate (DrawingCoordLeaderControl)
-
Linear (DrawingLinearLeader)
-
Weld (DrawingWeldLeader)
-
Default (DwgLeaderControl)
-
Margin (DwgMarginLeaderControl)
-
Stacked Labels (DwgStackLabelLeader)
-
Materials Handling Absolute (MHDrawingAbsoluteLeader)
-
-
To manually edit the .xml file, specify the style that you want applied to the leader line. Enclose this value within the following .xml tags.
<style>ANSI</style>