Block Location - Intergraph Smart 3D - Reference Data - Hexagon

Intergraph Smart 3D Drawings and Reports Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Drawings and Reports
Search by Category
Reference Data
Smart 3D Version
13

Returns the block location in relation to the source planning input (a block, assembly, or assembly block). If Space Volume is an input, then the software determines if the parts are inside or outside the input range. Parts within the block are drawn according to the graphic rule selected for the source.

This custom test is for all planning volume sources (block, assembly, or assembly block) in the Actions tab of the Edit Ruleset View Style dialog box. The custom test is used with plate part, profile part, and member sources.

Input

The block is the block selected as the input.

1 - Selected input

Parent of Input

In the hierarchy explorer, the block is a parent of the source input. For example, the block is the parent of an assembly selected as the input.

1 - Selected input

2 - Parent block

Child of Input

In the hierarchy explorer, the block is a child of the source input. For example, the block is the child of an assembly block selected as the input.

1 - Selected input

2 - Child block

Adjacent to Input

In model space the block is next to the block selected as the input.

1 - Selected input

2 - Adjacent blocks

Above Input

In model space the block is above (in model space) the block selected as the input.

1 - Selected input

2 - Block above input

Below Input

In model space the block is below (in model space) the block selected as the input.

1 - Selected input

2 - Block below input

No Input

No source planning input is selected.

Not Available

The part is not in a block.

Space Volume as an input

Inside Range

Outside Range