This property is available for Fillet and StaggeredFillet symbols. This value might be different depending on the welding standard (ISO or AWS).
-
This property corresponds to the IJWeldingSymbol property. You cannot configure it using the Symbol Configuration tab.
-
You cannot use this property if you also use the Primary/Secondary Side Groove Size and Primary/Secondary Side Actual Throat Thickness (Primary Side Bevel Depth) properties. If you selected check boxes 2 or 3, clear both to use this property.
-
The label template uses the default value, Nominal Throat Thickness, from the IJWeldingSymbol property.
-
To create a new label template, do the following:
-
Create a new label in the [Reference Data Folder]\SharedContent\Drawings\Catalog\Labels\Templates\WeldSymbols folder. For information about creating labels, see Create a Label.
-
Select the label template you just created from the Label Template list.
The software does not include Primary Side or Secondary Side in the label template name.
-
Click Save on the Symbol Configuration tab.
The software updates the label template XML as shown below.
Usage in Label Template XML
<contentModuleSettings>
<ID attributeName="PrimarySideNominalThroatThickness"
visible="1">WeldSymbols\Primary Side Nominal
Throat Thickness.rtp</ID><ID attributeName="SecondarySideNominalThroatThickness"
visible="1">WeldSymbols\Secondary Side Nominal
Throat Thickness.rtp</ID></contentModuleSettings>
FilletMeasureMethod |
Actual Leg Length |
S(E) |
---|---|---|
Leg |
Filled |
z + Actual Leg Length |
Leg |
Not filled |
z + (Nominal Throat Thickness x √2) |
Throat |
Not applicable |
a + Nominal Throat Thickness |
Physical Connection Properties
FilletMeasureMethod
-
Leg (1 or 2)
-
Throat (3)
PrimarySideNominalThroatThickness
3mm
SecondarySideNominalThroatThickness
3mm
PrimarySideActualLegLength
5mm
SecondarySideActualLegLength
5mm
ISO Symbol Representation Result
AWS Symbol Representation Result