Could not get the persistent object manager - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.x(2018)

Meaning: Failed to retrieve the persistent object manager. This is probably a memory problem. The software failed to create/update the profile part. Therefore, the profile (stiffener or beam) part has not been created or updated.

Recovery:

  1. Restart the command.

  2. Restart the session.

  3. Reboot the computer to verify that all computer memory has been released.

  4. If problem still exists, report steps taken to your support group.