Split connection is missing a required input. Delete the connection and replace. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.x(2018)

Meaning: The split connection has a predefined/expected number of inputs and outputs for defining a split connection. One or more of these inputs are missing, and therefore, the split operation cannot be completed. Why this would occur is unknown, and is not a user action issue but rather an internal software failure.

Recovery:

  1. Open the Structure task.

  2. Click Select .

  3. Set the Locate Filter to Split Connections.

  4. Select the split connection in error.

  5. Click Delete .

  6. Click Place Split and place the split connection again.