Unable to create geometry for [Turn feature name] , since previous and next straight features are overlapping. Please revise ProjectionX and/or ProjectionY value(s). - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.x(2018)

Meaning: A trench run was created or modified in such a way that a trench turn feature's previous and next straight features overlap.

Recovery:

  1. In the Workspace Explorer, select the trench turn feature that is in error.

  2. Click Properties .

    The Trench Turn Feature Properties dialog box displays.

  3. On the General tab, select Dimensions in the Category box.

  4. Change the projection values so that the inside lengths of the previous and next straight runs do not overlap.

  5. Click OK.

  6. Click Finish on the command ribbon.

-OR-

  1. In the Workspace Explorer, select the trench run that is in error.

  2. Click Path .

  3. Increase the lengths of the Sketch 3D segments so that the previous and next straight runs do not overlap.

  4. Click Finish on the path ribbon, and then click Finish on the command ribbon.