Axis-collinear frame connection is related to something other than a supporting member system. Change connection to unsupported and then re-select the supporting member. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

Intergraph Smart 3D
Administration & Configuration

Meaning: The supporting member input is not a member system, resulting in improper placement of the axis collinear connection. This error is an internal software failure where the software did not properly call the frame connection with its required inputs.


  1. Open the Structure task.

  2. Click Select .

  3. Set the Locate Filter to Frame Connections.

  4. Select the frame connection in error.

  5. Select By Rule from the Connection box on the ribbon.

  6. Redefine the end location of the member.