Could not retrieve the geometry of the plate system. Cannot determine if the lapped plate laps this system. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.x(2018)

Meaning: Could not retrieve the required geometry of the plate system. In addition, the software cannot determine if the lapped plate laps this system. The chosen plate might be on the To Do List or has a geometry that does not touch the system being processed.

Recovery:

  1. Verify that the plate is not on the To Do List.

  2. Correct the plate system to which the new plate is being lapped.

  3. If unsuccessful, report steps that cause this error to your support group.