General Tab (Edge Reinforcement Properties Dialog Box) - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

Intergraph Smart 3D
12.1 (2019)

Specifies general properties of the edge reinforcement profile system. Some properties displayed duplicate those available on other tabs, such as the Main tab. The property name appears on the left side of the grid and the corresponding property value appears on the right side of the grid.


Select the continuity type for the profile system. Continuity defines how the profile system reacts when it intersects another plate or profile system. Select Continuous to indicate that the profile system penetrates the other system. Select Intercostal to indicate that the profile system is penetrated by the other system.


Specifies the direction of the web thickness for symmetrical crossing-sections or the direction of the flange and web thickness for unsymmetrical cross-sections.


Displays the codelist value for Naming Category, defined on the Main tab. For more information, see Main Tab (Edge Reinforcement Properties Dialog Box).


Specifies the orientation of the edge reinforcement.

Specifies the relative continuity priority. For example, if a continuous part of priority 1 intersects a continuous part of priority 2, the priority 2 part is intercostal at the intersection.


Displays the profile type.


Specifies the offset direction along the plate face.


This property is not used.