Define landing curve by 2D - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

Language
English
Product
Intergraph Smart 3D
Subproduct
Molded Forms
Search by Category
Help
Smart 3D Version
12.1 (2019)
  1. Click Define using 2D Sketcher .

  2. Define a sketching plane using one of the following methods:

    Define a coincident plane
    Define an offset plane
    Define a plane using a point and a normal vector
    Define a plane using three points

  3. Click Add Intersecting Item .

  4. Select objects in the model that intersect the sketching plane to use as reference geometry.

    These extra objects display in the 2D environment.

  5. Click Add Projection Item .

  6. Select objects in the model that do not intersect the sketching plane that you want to use as reference geometry.

    These extra objects are projected onto the sketching plane and display in the 2D environment.

  7. Click Sketch 2D .

  8. Sketch the 2D stiffener profile landing curve that you want the software to project onto the plate system that you are stiffening. See Sketch 2D Best Practices.

    You can constrain the landing curve to geometric construction points offset from plate systems. See Point at Minimum Distance Command in the SmartSketch Drawing Editor Drawing Editor Help, available within the 2D environment.

  9. Click Finish.