Place a seam by offset - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
12.1 (2019)
  1. Click Seam by Offset on the vertical toolbar.

  2. Select the plate systems to receive the seam.

  3. Click Base Curve .

  4. Select a base curve that the software is to use to compute the offset curve.

  5. Click Offset .

  6. Type an offset value in the Offset box.

  7. Specify the offset method and count to use.

  8. Select, with a mouse click in a graphic view, on which side of the base curve to apply the offset. A red arrow appears as you move the mouse indicating the direction of the offset.

  9. Click Boundaries .

  10. Define the seam boundaries using one or more of the following methods. If you do not select boundaries, the software uses the entire length of the base curve to apply to the resulting seam curves.

    Pick boundaries
    Define a boundary curve

  11. Click Accept .

  12. Select whether to place a design seam or a planning seam.

  13. If the boundary definition results in two solutions, pick the needed solution using the following procedure:

    Solve ambiguous solution created by selected boundaries

  14. Click Finish to place the seam.