-
Click Straking Seam by Table Command on the vertical toolbar.
-
Select the plate part for the seam.
-
Click Accept .
-
Define the landing curve coordinates in the Landing Curve Table Dialog Box.
-
Click Close.
-
Click Boundaries to apply boundaries.
-
Define the seam boundaries.
-
Click Accept .
-
Click Finish to place the seam.
-
If you do not select boundaries, the software uses the entire length of the base curve to apply to the resulting seam curves.
-
A seam is always associated with a plate part.
-
You can define properties for the seam to provide a unique identification.