Place a sketched feature from the catalog - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Structural Detailing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Help
Smart 3D Version
13
  1. Click Place Sketched Feature on the vertical toolbar.

  2. Select the plate, profile, or member part in which to place the sketched feature.

  3. Click Properties .

  4. Specify the sketching plane for the opening using one of the following methods:

    Define an offset plane

    Define a plane using three points

    Define a plane using a point and a normal vector

    • If you selected a planar plate part, its surface is automatically specified as the coincident sketch plane. You can specify another sketch plane by one of the other methods if needed.

    • If you selected a profile or member part, one of the surface ports on the web or flange can be specified as the sketch plane.

  5. Click Add Intersecting Item .

  6. Select objects in the Model that intersect the sketching plane that you want to use as reference geometry. These extra objects will appear in the Sketch 2D environment.

  7. Click Add Projection Item .

  8. Select objects in the Model to use as reference geometry that do not intersect the sketching plane. These extra objects are projected onto the sketching plane and appear in the Sketch 2D environment.

  9. Click Sketched Feature Properties  to open the Sketched Feature Properties Dialog.

  10. Click Sketch 2D .

    The Sketched Feature Properties Dialog must be open when you click Sketch 2D. It cannot be accessed after the Sketch 2D environment is open.

  11. Select the Catalog tab on the Sketched Feature Properties Dialog.

  12. Select the opening to place from the opening shapes in the catalog.

  13. Drag the preview of the selected opening shape into the Sketch 2D environment.

  14. Click OK on the Sketched Feature Properties Dialog.

  15. Click Finish on the ribbon in the Sketch 2D environment.

  16. Click Finish.