Tests label points for equipment.
Usage in Label Template XML
<label>
<geometricAnalyzerSettings>
<gaModule>DrawingGAEquipmentStyle2</gaModule>
<placeLines>-1</placeLines>
<deDuplicateLables>-1</deDuplicateLables>
<lineStyle>ANSI</lineStyle>
</geometricAnalyzerSettings>
</label>
Customization
placeLines
Controls line placement through the coordinate label points along aligned objects. Use this property to include a single label in the drawing that specifies a common elevation for aligned objects.
In the following image, placeLines has been set to 0, and the software has placed a line connecting the equipment objects and a single label for the common Northing coordinate.
Type -1 to place lines. Type 0 to suppress lines.
DuplicateLabels
Specifies the points to label when more than one point is aligned horizontally or vertically.
Type -1 to place a label on the closest point.
1 – Label |
Type 0 to place a label on both points.
1 – First label |
lineStyle
Allows you to specify the style of the line connecting horizontally or vertically aligned pieces of equipment. Define this property when you have labeled equipment inside a plant with coordinate labels.
In the following graphic, the Line Style has been defined with the Dash Dot Red style.
1 - Dash Dot Red Line Style |
Examples
placeLines is -1 and deDuplicateLables is -1:
placeLines is -1 and deDuplicateLables is 0:
Although a content module creates the annotation output, this example shows how this module affects the output.