Welding Symbol Properties - Intergraph Smart 3D - Reference Data - Hexagon

Intergraph Smart 3D Drawings and Reports Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Drawings and Reports
Search by Category
Reference Data
Smart 3D Version
13.1
  1. Primary/Secondary Side Symbol
    Primary/Secondary Side Groove
    Primary/Secondary Side Supplementary Symbol
    Corresponds to the IJWeldingSymbol Properties. You cannot modify this property.

  2. Primary/Secondary Side Groove Size

  3. Primary/Secondary Side Actual Throat Thickness (Primary Side Bevel Depth)
    Primary/Secondary Side Actual Leg Length

  4. Primary/Secondary Side Nominal Throat Thickness

  5. Displays the Field Weld symbol.

  6. Displays the All Around symbol.

  7. Tail Note/Tail Note Is A Reference - use the Tail Notes label template. Otherwise, define a custom label template.

  8. Primary/Secondary Side Length - used only for intermittent welds. This value sets the nominal length of individual weld segments.

  9. Primary/Secondary Side Pitch

  10. Primary/Secondary Side Contour - corresponds to the IJWeldingSymbol Properties. You cannot modify this property.

  11. Primary/Secondary Side Finish Method

  12. Primary/Secondary Side Root Opening

  13. Primary/Secondary Side Groove Angle

  14. Primary/Secondary Side Number of Welds

  15. Primary/Secondary Side Supplementary Symbol

  16. C1 - used for a defining custom rule.

  17. C2 - used for a defining custom rule.

Layer

Displays controls for customizing the delivered sample layer template.

Combined Weld Symbols

Displays the bevel and fillet from one physical connection.