End Cut Embedded Symbols (Generic Rule Set) - Intergraph Smart 3D - Reference Data - Hexagon

Intergraph Smart 3D Drawings and Reports Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Drawings and Reports
Search by Category
Reference Data
Smart 3D Version
13.1

End Cut Symbols

For the generic rule set (DBRGenericRuleSet.GenericRuleSet), end cut embedded symbols are located in the [Reference Data Folder]\SharedContent\Drawings\Catalog\Rules\DBRRules\MetaGraphicRules\GenericLandingCurveWithEndCuts\EndCutRules folder. You create symbols in SmartSketch Drawing Editor. See Create a Custom Symbol for Drawings.

The following rules and symbols are used in the Molded Forms Rules embedded symbol rules. Rule selection is based on section types and end cut types defined for the profile part in the Molded Forms task.

Connection
Type

Section
Type

Primary Web Cut

Symbol File

Symbol
Graphic

By Rule

Any

Any

ByRule.sym

Welded

Any

Any

Welded.sym

Snip

Any

Any

Snip.sym

Cutback

Any

Any

Cutback.sym

Bracketed

Any

Any

Bracketed.sym

Any

Any

Error

Error.sym

The following rules and symbols are used in the default Structural Detailing Rules embedded symbol rules. Rule selection is based on section types and end cut types defined for the detailed profile part in the Molded Forms task.

Connection
Type

Section
Type

Primary Web Cut

Symbol File

Symbol
Graphic

Any

Any

Straight No Offset WebCuts

StraightNoOffsetWebCuts.sym

Any

Any

Straight Offset WebCuts

StraightOffsetWebCuts.sym

Any

Any

Sniped Offset WebCuts

SnipedOffsetWebCuts.sym

Any

Any

Sniped No Offset WebCuts

SnipedNoOffsetWebCuts.sym

By Rule

Any

Any

ByRule.sym

Welded

Any

Any

Welded.sym

Snip

Any

Any

Snip.sym

Cutback

Any

Any

Cutback.sym

Bracketed

Any

Any

Bracketed.sym

Any

Any

Error

Error.sym

End Cut Rules

For the generic rule set, Molded Forms Rule.xml and Structural Detailing Rule.xml are also delivered in the [Reference Data Folder]\SharedContent\Drawings\Catalog\Rules\DBRRules\MetaGraphicRules\GenericLandingCurveWithEndCuts\EndCutRules folder.

Your reference data administrator can customize the primary web cut, secondary web cut, top flange cut, and bottom flange cut within a connection type.

<SymbolInfo>

<ProfileInfo>

<!-- Start optional -->

<SectionType>Any</SectionType>

<ConnectionType>Any</ConnectionType>

<PrimaryWebCutInfo>

<First>Web Cut Name</First>

<Top>Any</Top>

<Bottom>Any</Bottom>

</PrimaryWebCutInfo>

<TopFlangeCutInfo>

<First>Any</First>

<Top>Any</Top>

<Bottom>Any</Bottom>

</TopFlangeCutInfo>

<BottomFlangeCutInfo>

<First>Any</First>

<Top>Any</Top>

<Bottom>Any</Bottom>

</BottomFlangeCutInfo>

<SecondaryWebCutInfo>

<First>Any</First>

<Top>Any</Top>

<Bottom>Any</Bottom>

</SecondaryWebCutInfo>

<!-- End optional -->

</ProfileInfo>

<Symbol>WebCutName.sym</Symbol>

</SymbolInfo>