-
Click Place Slabs Command on the vertical toolbar.
-
Set the parent system for the slab, the slab type and composition, and face position.
-
Define a plane for the slab.
Define Plane as Coincident
Define Plane using Offset from Plane
Define Plane using Angle to Plane
Define Plane using Vector and Point
Define Plane using Three Points -
Click Accept .
-
Click Select Boundaries on the Place Slab Ribbon.
-
Select objects in the model to define the boundaries of the slab. You can select members, grid lines, edges of equipment, edges of other slabs, or most anything else in the model to define the slab boundaries. The selected objects must roughly define a close shape.
-
Click Accept to display the slab in dynamics.
-
Click Finish.