Rotate an existing wall using 2-D sketch - Intergraph Smart 3D - Help

Intergraph Smart 3D Civil

Language
English
Product
Intergraph Smart 3D
Subproduct
Civil
Search by Category
Help
Smart 3D Version
12.1 (2019)
  1. Click Select on the vertical toolbar.

  2. Set the Locate Filter to Wall Systems.

  3. Select the wall that you want to rotate.

  4. Click Select a Path on the Place Wall Ribbon.

  5. Click Sketch 2D on the ribbon.

  6. Select objects in the model that you want to see when sketching the wall path in the 2-D environment.

  7. Click Draw .

  8. Click Select on the vertical toolbar. Be sure to use the Bottom Up option during selection.

  9. Select the wall path that you want to rotate.

  10. On theChange toolbar, click Rotate .

  11. Rotate and move the wall as needed.

  12. In the 2-D environment, click Close .

  13. Click Finish.

  14. Set the wall system, type, composition, and other properties.

  15. Optionally, click Select Boundaries to limit the height of the wall.

  16. Click Finish.