The Draw toolbar displays by default docked to the left side of the interface. Use the commands on this toolbar to place the basic elements of your symbol.
Select Tool - Use to select, modify, and manipulate elements. For more information, see Select Tool |
|
SmartSelect - Creates a select set by drawing a rectangular or polygonal fence around objects based on points that you define. For more information, see SmartSelect Command. |
|
Line - Draws a line. For more information, see Line Command. |
|
Line/Arc Continuous - Draws one line or a series of connected lines. For more information, see Line/Arc Continuous Command. |
|
Place Doubleline - Draws a doubleline or a series of connected doublelines. For more information, see Place Doubleline Command. |
|
Connector - Connects two elements together. For more information, see Connector Command. |
|
Tangent Arc - Draws an arc tangent or perpendicular to one or two elements. For more information, see Tangent Arc Command. |
|
Arc by 3 Points - Draws an arc using three points. For more information, see Arc by 3 Points Command. |
|
Arc by Center Point - Draws an arc using three points. For more information, see Arc By Center Point Command. |
|
Curve - Draws a smooth, open or closed curve. For more information, see Curve Command. |
|
FreeForm - Draws freeform curves or splines. For more information, see FreeForm Command. |
|
FreeSketch - Draws lines, arcs, rectangles, and circles by converting a sketch into a precision drawing. For more information, see FreeSketch Command. |
|
Circle by Center Point - Draws a circle using a center point and radius. For more information, see Circle by Center Point Command. |
|
Circle by 3 Points - Draws a circle using three points that define the circumference. For more information, see Circle by 3 Points Command. |
|
Tangent Circle - Draws a circle tangent to one or two elements. For more information, see Tangent Circle Command. |
|
Ellipse by Center Point - Draws an ellipse using the center point and two edge points. For more information, see Ellipse by Center Point Command. |
|
Ellipse by 3 Points - Draws an ellipse using three edge points. For more information, see Ellipse by 3 Points Command. |
|
Rectangle - Draws a rectangle using three points. For more information, see Rectangle Command. |
|
Fillet Rectangle - Draws a fillet rectangle using four points and a fillet radius that you define. For more information, see Fillet Rectangle Command. |
|
Polygon - Draws an n-sided polygon based on properties you define. For more information, see Polygon Command. |
|
Polygon by Center - Draws an n-sided polygon based on properties you define. For more information, see Polygon by Center Command. |
|
Revision Cloud - Places a cloud around objects in a drawing. For more information, see Revision Cloud Command. |
|
Point - Draws a point. For more information, see Point Command. |
|
Fillet - Draws a fillet between two elements. For more information, see Fillet Command. |
|
Chamfer - Draws a chamfer, or bevel. For more information, see Chamfer Command. |
|
Trim - Trims open and closed elements to the closest intersection in both directions. For more information, see Trim Command. |
|
Trim Corner - Draws a corner by extending or trimming two selected open elements. For more information, see Trim Corner Command. |
|
Custom Curve Trim - Changes the display (symbology) of a curve to show a shorter (trimmed) curve. The original curve geometry is kept in the file. For more information, see Custom Curve Trim. |
|
Split - Provides a variety of modes for splitting graphic elements. For more information, see Split Command |
|
Trim to Element - Trims the selected element to another selected element. For more information, see Trim to Element Command. |
|
Trim to Point - Trims the selected element to a point in space. For more information, see Trim to Point Command. |
|
Trim Inside - Trims within the selected element (partial delete). For more information, see Trim Inside Command. |
|
Extend to Next - Extends one or more open elements until they intersect with the nearest element. For more information, see Extend to Next Command. |
|
Extend to Point - Extends one or more open elements to a point in space or to another element. For more information, see Extend to Point Command. |
|
Fill - Places a solid color or pattern inside a closed boundary. For more information, see Fill Command. |
|
Mask - Masks out underlying graphics without deleting or trimming. For more information, see Mask Command. |
|
Create Symbol - Creates a symbol from elements. For more information, see Create Symbol Command. |