Hanger Design with Support Thermal Movement - CAESAR II - Reference Data

CAESAR II Applications Guide (2019 Service Pack 1)

PPMProduct
CAESAR II
PPMCategory_custom
Reference Data
Version_CAESAR
11.0 (2019)

Type unique connecting node numbers that do not exist on any pipe element on the Hanger Auxiliary Data tab in the Hanger Connecting Node box. The hanger is designed to act with one end at the hanger node and with one end at the hanger-connecting node.

Thermal growth of the hanger-connecting node can be specified on any pipe element.

In the following example, the hanger at node 9 is supported from a structural steel extension (node 1009) from a large vertical vessel. The vessel at the point where the hanger is attached grows thermally in the plus Y direction by 3.5 inches.