-
Click Place Slabs Command on the vertical toolbar.
-
Define a plane for the slab.
Define Plane as Coincident
Define Plane using Offset from Plane
Define Plane using Angle to Plane
Define Plane using Vector and Point
Define Plane using Three Points -
Click Accept .
-
Click Select Boundaries on the Place Slab Ribbon.
-
Select objects in the model to define part of the slab boundaries. You can select members, grid lines, edges of equipment, edges of other slabs, or most anything else in the model to define the slab boundaries.
-
Click Sketch 3D .
-
Sketch a path that defines the remaining part of the slab boundary. See Define a path.
-
Click Finish.
-
Click Accept .
-
Set the slab system, type, priority, face position, and other properties.
-
Click Finish.