General Tab (Trench Part Properties Dialog) - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Civil

Language
English
Product
Intergraph Smart 3D
Subproduct
Civil
Search by Category
Help
Smart 3D Version
13

Specifies general properties of the trench part. The property name appears on the left side of the grid, and the corresponding property value appears on the right side of the grid.

While you can edit parts, you cannot delete them.

Category

Specifies the properties category to view. Select Standard, Fabrication and Construction, Surface Treatment and Coating, or Responsibility.

Standard Category

Parent System

Displays the parent system for the object.

Name

Displays the name of the trench part. The name is based on the Naming Rule selection. If you want to type a new name for the trench, select User Defined in the Naming Rule box.

Naming Rule

Specifies the naming rule to use to automatically name the trench. To manually type your own name in the Name box, select User Defined.

Group Name

Specifies the Group Name of the trench part as specified in the trench cross-section symbol.

Group Type

Specifies the Group Type of the trench part as specified in the trench cross-section symbol.

Volume

Displays the volume of the trench part as calculated by the software.

Surface Area

Displays the area of the trench part as calculated by the software.

Reporting Requirement

Specifies the reporting requirement for the object. To change the options on the list, edit the Reporting Type select list in Catalog.

Reporting Type

Specifies the type of reporting. To change the options on the list, edit the Reporting Type select list in Catalog.

Dry Weight

Specifies the total dry weight of the trench, not including liquid or routed systems that may run through the trench. This value is calculated by the software. The weight for the trench is volume ยด density. The volume is defined under the Volume category of the trench run. The density is read from the catalog for the materials defined on the Start Cross-Section tab.

Wet Weight

Specifies the wet weight of the liquid or routed systems that may run through the trench.

Dry CGX

Specifies the X-axis location of the dry center-of-gravity.

Dry CGY

Specifies the Y-axis location of the dry center-of-gravity.

Dry CGZ

Specifies the Z-axis location of the dry center-of-gravity.

Wet CGX

Specifies the X-axis location of the wet center-of-gravity.

Wet CGY

Specifies the Y-axis location of the wet center-of-gravity.

Wet CGZ

Specifies the Z-axis location of the wet center-of-gravity.

<Group Name> Material

Specifies the material used for the part. The name of the part group, such as Left Wall, Right Wall, or Slab, displays as the property name. Material properties are inherited from the trench run and cannot be edited.

A separate line displays in the grid for each part group.

<Group Name> Material Grade

Specifies the material grade used for the part. The name of the part group, such as Left Wall, Right Wall, or Slab, displays as the property name. Material properties are inherited from the trench run and cannot be edited.

A separate line displays in the grid for each part group.

Fabrication and Construction

Specifies values for fabrication and construction requirements.

Fabrication Requirement

Specifies the fabrication requirement for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.

Rule Driven

Specifies that a rule drives the value. This is the default option. Click to switch to User Driven .

User Driven

Allows you to select a value. Click to switch to Rule Driven .

Fabrication Type

Specifies the type of fabrication for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.

Rule Controlled

Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.

Construction Requirement

Specifies the construction requirement for the object. To change the options on the list, edit the Construction Requirement select list in Catalog.

Construction Type

Specifies the type of construction for the object. To change the options on the list, edit the Construction Type select list in Catalog.

Surface Treatment and Coating

Specifies values for surface treatment and coating requirements.

Exterior Coating Requirement

Specifies the coating requirement for the object. To change the options on the list, edit the Coating Type select list in Catalog.

Rule Driven

Specifies that a rule drives the value. This is the default option. Click to switch to User Driven .

User Driven

Allows you to select a value. Click to switch to Rule Driven .

Exterior Coating Type

Specifies the type of coating for the object. To change the options on the list, edit the Exterior Coating Type select list in Catalog.

Rule Controlled

Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.

Coating Color

Specifies the color of the object coating. To change the options on the list, edit the Coating Color select list in Catalog. Smart 3D includes this property in the painting area report.

Rule Controlled

Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.

Exterior Coating Area

Specifies the area of the coating for the object.

Responsibility

Specifies values for departmental or personnel responsibilities.

Cleaning Responsibility

Specifies the party responsible for cleaning the object. To change the options on the list, edit the Cleaning Responsibility select list in Catalog.

Design Responsibility

Specifies the party responsible for designing the object. To change the options on the list, edit the Design Responsibility select list in Catalog.

Fabrication Responsibility

Specifies the party responsible for fabricating the object. To change the options on the list, edit the Fabrication Responsibility select list in Catalog.

Installation Responsibility

Specifies the party responsible for installing the object. To change the options on the list, edit the Installation Responsibility select list in Catalog.

Painting Responsibility

Specifies the party responsible for painting the object. To change the options on the list, edit the Painting Responsibility select list in Catalog.

Requisition Responsibility

Specifies the party responsible for ordering the object. To change the options on the list, edit the Requisition Responsibility select list in Catalog.

Supply Responsibility

Specifies the party responsible for delivering the object. To change the options on the list, edit the Supply Responsibility select list in Catalog.

Testing Responsibility

Specifies the party responsible for testing on the object. To change the options on the list, edit the Testing Responsibility select list in Catalog.