Edge Feature Rules - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Detailing Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
11.x(2016)

Determines edge feature generation on plate and profile parts.

Visual Basic Project: [Programming Resources Folder]\Programming\ExampleCode\StructDetail\SmartOccurrence\Release\SMEdgeFeatureRules.vbp

Compiled Rule: [Reference Data Folder]\SharedContent\Bin\StructDetail\SmartOccurrence\Release\SMEdgeFeatureRules.dll

Bulkload: SM_SRDEdgeFeature.xls

The following selector class modules are included in the Visual Basic project. The inputs to each selector rule are an edge and a point from a plate or profile part in the model.

RootEdgeSel

This selector rule determines the edge feature type and calls the appropriate sub-selector rule. This selector rule provides the Placement Type, Edge Offset, Drainage, and Treatment questions, and passes the answers down to the sub-selector rules. This selector rule is associated with the RootEdge sheet of the bulkload workbook.

OffEdgeSel

This selector rule determines the offset edge smart occurrence. This selector rule does not provide any questions and is associated with the OffEdge sheet of the bulkload workbook.

CutEdgeSel

This selector rule determines the cut edge smart occurrence. This selector rule does not provide any questions and is associated with the CutEdge sheet of the bulkload workbook.

There are two sets of smart items:

  • Items without along Edge in the name. These items cut perpendicular to the plate on which the edge feature is placed. The behavior of these items is unchanged from earlier versions. The following figure illustrates this type of edge cut. The edge feature is highlighted. The cut is perpendicular to the purple plate plane.

  • Items with along Edge in the name. These items cut the edge feature parallel to the bounding plate. The following figure illustrates this type of edge cut. The edge feature is highlighted. The cut is parallel to the blue plate plane.

WaterStopSel

This selector rule determines the waterstop smart occurrence. This selector rule does not provide any questions and is associated with the WaterStop sheet of the bulkload workbook.

OffEdgeParm

This parameter rule determines the value of AdjustedOffset based on the specified value of Offset parameter and BevelDepth.

See Also

Structural Detailing Reference Data Workflow
Structural Detailing Rules