Tee welds are controlled by the category from the assembly connection and the type of objects being welded, and passed down to the physical connection.
The default value for First Welding Side is Molded. You can change it to AntiMolded.
Tee Weld |
Category or |
Parameters |
---|---|---|
Y |
One Sided Bevel |
If thickness £ 25mm, Nose = 3mm If thickness > 25mm and £ 38mm, Nose = 5mm If thickness > 38mm, Nose = t/2 RefSideBevelAngle = 45º Fillet Leg = 0.2 * minimum t |
K |
TwoSidedBevel |
If thickness £ 25mm:]
If thickness > 25mm:
BevelAngle (both) = 45º Fillet Leg = 0.2 * minimum t |
V |
OneSidedBevel Thickness £ 25mm |
BevelAngle (both) = 45º Fillet Leg = 0.2 * minimum t |
X |
TwoSidedBevel Thickness > 25mm |
If thickness £ 38mm:
If thickness > 38mm:
RefSideBevelAngle = 45º Fillet Leg = 0.2 * minimum t |
Staggered Zig Zag |
Staggered |
Pitch = 300mm Length = 75mm Fillet Leg = 0.2 * minimum t |
Chain |
Chain |
Pitch = 300mm Length = 75mm Fillet Leg = 0.2 * minimum t |
Chill |
Chill |
RootGap = 6mm RefSideBevelAngle = 30º |
Fillet 1 |
Non-tight collar Tripping bracket Profile stiffeners |
Leg = 0.2 * minimum t |
Fillet 2 |
Profile end to |
Leg = 0.2 * minimum t |