End Cut Rules - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Detailing Reference Data

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Reference Data
Version_S3D
11.x(2016)

Determines end cut generation for profile stiffeners. Profile stiffeners are children of plates and are created in the Molded Forms task. An end cut is a combination of a web cut and a flange cut, and is placed when a profile is detailed in the Structural Detailing task. The type of end cut is set by the assembly connection rules. For more information, see Assembly Connection Rules.

Visual Basic Project: [Programming Resources Folder]\Programming\ExampleCode\StructDetail\SmartOccurrence\SMEndCutRules\SMEndCutRules.vbp

Compiled Rule: [Reference Data Folder]\SharedContent\Bin\StructDetail\SmartOccurrence\Release\SMEndCutRules.dll

Bulkload: SM_SRDEdgeFeature.xls

The following selector class modules are included in the Visual Basic project:

FlangeCutSel

The inputs to this selector rule are the bounded profile and the bounding parts from the model. This selector rule determines the end cut type and calls the appropriate sub-selector rule (below). This selector rule provides the Bottom Flange and Apply Treatment questions, and passes the answers down to the sub-selector rules. This selector rule is associated with the FlangeCuts sheet of the bulkload workbook.

EndToEndFlangeCutSel

This sub-selector rule provides the WeldPart, BottomFlange, SplitEndToEndCase, FlipEndToEndAngle, and ApplyTreatment questions. This selector rule is associated with the FlangeCutsEndToEnd sheet of the bulkload workbook.

EndToLongBoxFlangeCutSel

This sub-selector rule provides the KnuckleEndCut, BottomFlange, and ApplyTreatment questions. This selector rule is associated with the FlangeCutsLongBox sheet of the bulkload workbook.

EndToMiterFlangeCutSel

This sub-selector rule provides the WeldPart, KnuckleEndCut, BottomFlange, and ApplyTreatment questions. This selector rule is associated with the FlangeCutsMiter sheet of the bulkload workbook.

WebCutSel

The inputs to this selector rule are the bounded profile and the bounding parts from the model. This selector rule determines the web cut type and calls the appropriate sub- selector rule (below). This selector rule provides the End Cut Type and Apply Treatment questions, and passes the answers down to the sub-selector rules. This selector rule is associated with the WebCuts sheet of the bulkload workbook.

EndToEndWebCutSel

This sub-selector rule provides the WeldPart, SplitEndToEndCase, FlipEndToEndAngle, and ApplyTreatment questions. This selector rule is associated with the WebCutsEndToEnd sheet of the bulkload workbook.

EndToLongBoxWebCutSel

This sub-selector rule provides the KnuckleEndCut and ApplyTreatment questions. This selector rule is associated with the WebCutsLongBox sheet of the bulkload workbook.

EndToMiterWebCutSel

This sub-selector rule provides the WeldPart, KnuckleEndCut, and ApplyTreatment questions. This selector rule is associated with the WebCutsMiter sheet of the bulkload workbook.

LappedWebCutSel

This sub-selector rule is used with FB, EA, UA, and B cross-sections, and places a lapped web cut connection with the bounding part, including the required lap welds. Provides the AddCornerFeature question. This selector rule is associated with the WebCutsLapped sheet of the bulkload workbook.

See Also

Structural Detailing Reference Data Workflow
Structural Detailing Rules