Modify an Opening - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
11 (2016)
  1. Click Select on the vertical toolbar.

  2. Select Openings in the Locate Filter.

  3. Select the opening to modify. You can select the opening in a graphic view or from the Workspace Explorer.

  4. Using the ribbon controls, edit the opening as needed.

If multiple sketched openings were created on the same sketch, you can modify them at the same time.