-
Click Reference Curve by Intersection Command to display the Reference Curve by Intersection Ribbon.
-
Select the plate system to receive the reference curve.
-
Click Intersecting Objects .
-
Select an intersecting grid plane or intersecting plate system where you want the reference curve.
-
Click Boundaries .
-
Define the reference curve boundaries using one or more of the following methods:
-
Click Accept .
-
If the boundary definition results in two solutions, pick the needed solution using the following procedure:
-
Click Finish to place the reference curve.
-
If you do not select boundaries, the software uses the entire length of the base curve to apply to the resulting reference curve.
-
A reference curve is always attached to a plate system.
-