Pipe Segments (DrawingGAPipeSegments) - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.x(2018)

Groups dimensions for pipe segments of any angle into chained families. The software places the dimensions within the drawing view.

Dimensioned pipe segments

Although a content module creates the annotation output, this example shows how this module affects the output.

Usage in Label or Dimension Template XML

<geometricAnalyzerSettings>
<gaModule value="DrawingGAPipeSegments">
<horiz>0</horiz>
<vert>0</vert>
<maxDimOffset>0.0</maxDimOffset>
<maxWitnessLength>0.0</maxWitnessLength>
<overall>0</overall>
</gaModule>
</geometricAnalyzerSettings>

Customization

horiz

Places dimensions that measure horizontal distances on the drawing sheet.

vert

Places dimensions that measure vertical distances on the drawing sheet.

maxDimOffset

Determines the maximum linear paper space distance between consecutive witness lines in a linear distance dimension group.

maxWitnessLength

Controls the length of witness lines so that you can determine how far across the drawing the line is drawn. Points that fall outside the maximum witness length are eliminated from consideration.

overall

Places an additional dimension over each dimension chain cluster identified by the rule.