Orthographic graphic module: None
Rule set graphic module: Generic Stiffener Landing Curve
Extracts the profile part landing curve and sends the geometry to the drawing view.
You can add the AddSolidForVHL flag to prevent landing curves from hiding other landing curves when they are drawn.
The XML is in the following format:
<SECTION Type="*" AddSolidForVHL="FALSE">
<!-- the aspect for landing curve is not bulkloaded -->
<ASPECT Number="15" VHLOffset="0.2"></ASPECT>
For example, in the model, the profile is below the plate:
On the drawing view, the landing curve of the profile part is drawn: