Invalid setback parameters. The setback distance you entered will not work. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Meaning: The specified setback parameters caused the fireproofing to fail because either there is no setback attribute defined on the symbol, the two setbacks overlap, or the setback is larger than the length of the member being insulated.

Recovery:

  1. Open the Structure task.

  2. Click Select .

  3. Set the Locate Filter to Insulation.

  4. Select the fireproofing with the incorrectly defined setback distances.

  5. Edit the Distance 1 and Distance 2 values on the ribbon as needed.