Failed to add attributes and moniker data to the surface. The plate will not display properly. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Recovery:

  1. Verify that all the inputs are properly identified. They must be of the type curve, point or an edge port.

  2. Update any inputs that are on the To Do List.

  3. If proper inputs are provided and the problem persists, report steps taken to your support group.