Plate is not cut by opening because the opening contour does not project onto the plate. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Meaning: The opening cannot be applied to the plate system, so the plate system is not cut.

Recovery:

  • Verify that the opening sketch can be projected to the plate system surface.

  • Verify that the opening sketch is within the plate boundaries.

  • Delete duplicate openings or openings that are fully inside other openings.