Axis-end frame connection requires the same permission group for both member systems. Edit one of the permission groups to match the other. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Meaning: To establish the axis-end connection, the permission group of the supporting member and the supported member must be the same. The software failed to prevent this from occurring during placement or paste.

Recovery: Reset the permission group of either the supporting or supported member. They should both get the same permission group.

  1. Open the Structure task.

  2. Click Select .

  3. Set the Locate Filter to Frame Connections.

  4. Select the frame connection in error.

  5. Select By Rule from the Connection box on the ribbon.

  6. Redefine the end location of the member.