General
Dimensions
Calculate Rung Spacing
Displays the Max Rung Spacing box. Clear the check box to display the Rung Spacing text box.
Max Rung Spacing
Specifies the maximum distance between each rung of the ladder and evenly spaces the rungs by the defined maximum value.
Rung Spacing
Specifies the distance between each rung of the ladder.
Sloped
Indicates that the ladder is sloped.
Caged
Indicates that the ladder has a cage. This option activates options in the Members portion of the Advanced Ladder Properties dialog box.
Bottom Mounting Clips
Allows you to include bottom mounting clips on your ladder. This option activates options in the Members portion of the Advanced Ladder Properties dialog box.
Wall Support
Allows you to include wall support members on your ladder. This option activates options in the Members portion of the Advanced Ladder Properties dialog box.
Above Floor
Specifies the distance the ladder extends above the floor.
Wall Offset
Specifies the offset of the ladder from the wall.
Distance to Top Rung
Specifies the distance to the top rung of the ladder.
Rail Width
Specifies the width of the rail on the ladder.
Connections
Top Connection
Extension Length
Specifies the length of the extension at the top of the ladder.
Connection Offset
Specifies the offset of the connection at the top of the ladder.
Height
Specifies the height of the connection at the top of the ladder.
Bottom Mounting Clips
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.
Bend Length
Specifies the bend length for the connecting mounting clips at the bottom of the ladder.
Ladder Bar to Floor Gap
Specifies the distance between the bottom of the ladder and the floor below it.
Bend Width
Specifies the bend width for the connecting mounting clips at the bottom of the ladder.
Wall support
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.
Wall Support Location on Ladder
Use the Add () or Delete () buttons to place wall supports on the ladder.
Bend Length
Specifies the bend length for the connecting wall supports on the ladder.
Overlap Extension
Specifies the overlap length for the connecting wall supports on the ladder.
Ladder Exit
Exit Details
Exit Direction
Select the direction of the ladder exit from the available options:
Open Forward
Open Right
Open Left
Rail Top Exit Width
Specifies the width of the rail at the top exit.
Side Outlet Extension
Specifies the extension of the side outlet.
Side Outlet Width
Specifies the width of the side outlet.
Members
Ladder Bars
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.
Rungs
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.
Cage Bars
Cage Bar Spacing
Specifies the spacing distance between the bars on the cage.
Continuous
Indicates that the cage bars are continuous.
Cage Bar Angle
Specifies the angle between the bars on the cage.
Cage Side Bar Number
Specifies the number of side bars in the cage.
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.
Cage Hoops
Curved Hoop
Indicates that the cage has a curved hoop.
Hoop Attachment Length
Specifies the length of the hoop attachment.
Hoop Attachment Width
Specifies the width of the hoop attachment.
Max Hoop spacing
Specifies the maximum spacing between the hoops on the ladder.
Bottom Hoop
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.
Bottom Hoop Radius
Specifies the radius of the bottom hoop of the cage.
Bottom Hoop Clearance
Specifies the distance between the bottom of the ladder and the beginning of the bottom hoop of the cage.
Small Radius Of Bottom Hoop
Specifies the small radius of the bottom hoop of the cage.
Intermediate Hoop
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.
Intermediate Hoop Radius
Specifies the radius of the intermediate hoop of the cage.
Small Radius Of Intermediate Hoop
Specifies the small radius of the intermediate hoop of the cage.
Top Hoop
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.
Top Hoop Radius
Specifies the radius of the top hoop of the cage.
Small Radius Of Top Hoop
Specifies the small radius of the top hoop of the cage.