Defines or edits the Bill of Material (BOM) schedule template. The template is stored in the configuration file listed at the top of the dialog.
Available Columns
Lists all the information that you can include in the BOM. These columns can be added to any schedule template in any order using drag and drop.
-
CADWorx Plant list
Lists the data you can display in a bill of material for CADWorx Plant components. You can drag-and-drop the data you want to the Selected Columns list.
-
CADWorx Structure list
Lists the data you can display in a bill of material for CADWorx Structure components. You can drag-and-drop the data you want to the Selected Columns list.
-
CADWorx HVAC list
Lists the data you can display in a bill of material for CADWorx HVAC components. You can drag-and-drop the data you want to the Selected Columns list.
-
CADWorx Equipment list
Lists the data you can display in a bill of material for CADWorx Equipment components. You can drag-and-drop the data you want to the Selected Columns list.
-
Nozzle Schedule list
Lists the data you can display in a bill of material for Nozzle Schedules. You can drag-and-drop the data you want to the Selected Columns list.
Selected Columns
Shows all the columns that have been selected and their order of appearance in the schedule from left (top of list box) to right (bottom of list box). Use Sort Order to set the order by which these columns are sorted.
Report Filter
Allows you to select the filter options for the BOM template.
-
LAYER
Lists the layers under the Filter Options.
-
COMPONENT_TYPE
Lists the component types under the Filter Options.
-
COMMAND_OPTIONS
Lists the command line options under the Filter Options.
See Filter Options below for detail on each report filter.
Column Option
Alignment
Specifies the text alignment for the selected column.
Column title
Specifies the text heading for the selected column.
Column width
Specifies the width for the selected column.
Filter Options
Layers
Select a layer name to show the components on that layer in the BOM output. Clear the Existing layer if it contains components that you do not want to show in the BOM output. Any cleared layer name does not show components on that layer in the BOM output. Select All to include all components based on all layers in the bill of material. Double-click to clear the All check box and clear all layer options. Double-click a component in the model to check the layer in the properties.
Plant Layers
_150 |
0 |
Bom |
Border |
CADWorx 1 |
CADWorx 2 |
CI |
CI_HVAC |
Clash |
Dim1 |
Dim2 |
Equip |
Exist |
Graph |
HVAC |
PSC_Bom |
Supports |
System |
Text |
TopWorks |
Viewl |
VolumeArea |
Structure Layers
AISC |
Base Plate |
Beams |
Bom |
CI_Steel |
Columns |
Concrete |
Decking |
Dim1 |
Dim2 |
Existing |
Footings |
Graph |
Grating |
Grid Bubbles |
Grid Lines |
Grout |
Gusset Plate |
Handrail |
Horizontal Bracing |
Ladders |
Pier |
Slab |
Stairs |
Structural Plate |
System |
Text |
Vertical Bracing |
Wall |
Component Type
Select a component type to show the components of that type in the BOM output. Clear component types that you do not want to show in the BOM output.
Piping |
Steel/Structure |
Piping HVAC |
Concrete |
Pipe Support |
Equipment |
Equipment Nozzle |
Command Options
Select a command option to show those selected command options in the BOM output. Clear command options that you do not want to show in the BOM output.
Assembly |
Line Number |
Sort Order
Controls the sort order and accumulation of steel components in the BOM. For more information, see BOM Sort Order / Accumulation Dialog Box.