Configure PDMS item code settings - Intergraph Smart Isometrics I-Convert - Help - Hexagon PPM

Smart Isometrics I-Convert Help

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart Isometrics I-Convert
PPMCategory
Help
Version_IConvert
8.0(2019)

The options on the Item Code Settings dialog box allow you to do such things as specify if item codes are unique and remove bore from the item code.

  1. In the Settings dialog box, expand the PDMS Settings node.

  2. Select Item Codes.

    The Item Code Settings dialog box appears.

  3. If necessary, select Unique item codes.

    Select the Unique item codes option if you are certain that your item code system will not produce the same item code and bore combination for essentially different components.

  4. In the Item Code 1 list, select ITEMCODE. This is the code that you see on the drawing and in the material lists.

  5. In the Bore delimiter list, select one of the PDMS bore delimiters or type one of your own.

  6. In the Item Code 2 list, select SPREF.

    This is required when taking Smart Isometrics data back to PDMS (using I-Export).

  7. Click OK.