Errors and Warnings - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports Assemblies

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
11 (2016)
  1. When more than ten pipes are selected to place a support.

  2. When pipes which have different slope angles are selected to place a support.

  3. When the section type is RS Section and the connection type is Wrapping or Welded.

  4. When the frame connection type is Wrapping or Welded and the frame height offset or the frame width offset is more than the section depth.

  5. When L Type Corner Support is selected and the overhang option is set to adjust to supporting steel.

  6. When a support is placed by structure and the overhang option is set to adjust to supporting steel.

  7. When the overhang option is set to adjust to supporting steel and is placed on a slab, wall, or deck.

  8. When type-T assembly is placed with frame connection type welded.

  9. When a type- UV assembly is placed with Flat bar from Rule set to False and Flat bar Size selected as NULL.

  10. When a type-U assembly is placed by point and by selecting only one supporting steel.

  11. For a type- U assembly, if you set the snipped properties to Mitered and Wrapping connection type.

  12. When the Section Size from Rule is set to False and the Section Size is selected as NULL.

  13. When the new property Corner Overhang is not bulk loaded and the Overhang Option is set to User defined.