Place a plate edge reinforcement part - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Detailing

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.x(2018)
  1. Click Plate Edge Reinforcement Part on the vertical toolbar.

  2. Select the free edge to reinforce.

  3. Specify the offsets to use.

    • 1 is the outer offset.

    • 2 is the inner offset.

  4. Specify the side of the plate on which the plate edge reinforcement is placed.

  5. Click Finish.